【软管泵水渠成型机按需设计】

单管软管泵特点:
动力消耗少，可精确计量输出；易损件少，更换时间短；独特无密封结构，不会产生泄露；自吸能力强，可达8米；可正反向运转，具有自清理能力；压轴采用滚动摩擦，泵腔无需加油；结构简单，操作维修方便；出口压力 可达1.6Mpa；输送高粘度、高固含量、固体颗粒、纤维物质、及其他杂志等液物料，不会产生任何堵塞。

Single tube hose pump features:
Less power consumption, accurate metering output; less wearing parts, short replacement time; unique non-sealed structure, no leakage; strong self-priming ability, up to 8 meters; can run forward and reverse, with self-cleaning ability; final shaft Rolling friction, no need to refuel the pump cavity; simple structure, convenient operation and maintenance; outlet pressure up to 1.6Mpa; conveying high viscosity, high solid content, solid particles, fibrous material, and other magazines and other liquid materials, without any blockage .

 

软管泵属于蠕动泵的范畴，主要是由一根特制的橡胶软管，对应泵体内转子总成上的一对压辊，当压辊沿着橡胶软管转动时，压辊与泵壳产生的挤压力将橡胶软管压扁，在软管自身弹性和侧导辊的强制下，通过恢复原状产生的真空吸入流体物料，物料在压辊的机械挤压下从管内排出，如此往复循环，从而达到连续输出物料的目的。

The hose pump belongs to the category of peristaltic pump. It is mainly composed of a special rubber hose corresponding to a pair of pressure rollers on the rotor assembly in the pump body. When the pressure roller rotates along the rubber hose, the pressure roller and the pump housing The squeezing force flattens the rubber hose. Under the elasticity of the hose itself and the force of the side guide rollers, the fluid material is sucked in by the vacuum generated by the original state. The material is discharged from the tube under the mechanical pressure of the pressure roller, and so on. , So as to achieve the purpose of continuous output of materials.

 

软管泵性能<br />
软管泵性能的两个主要参数为排量和压力。排量以每分钟排出若干升计算?它与钻孔直径及所要求的冲洗液自孔底上返速度有关，即孔径越大，所需排量越大。要求冲洗液的上返速度能够把钻头切削下来的岩屑?岩粉及时冲离孔底，并可靠地携带到地表。地质岩心钻探时一般上返速度在0.4～1米/分左右。<br />泵的压力大小取决于钻孔的深浅冲洗液所经过的通道的阻力以及所输送冲洗液的性质等。钻孔越深管路阻力越大、需要的压力越高。随着钻孔直径，深度的变化，要求泵的排量也能随时加以调节。在泵的机构中设有变速箱或以液压马达调节其速度、以达到改变排量的目的。为了确掌握泵的压力和排量的变化软管泵上要安装流量计和压力表，随时使钻探人员，解泵的运转情况同时通过压力变化判别孔内状况是否正常以预防发生孔内事故。！